Enter User Name And Password For The Following Server Word Mac 0611F

11/27/2021by admin
Keep your passwords safe
Get Secrets, a secure password manager app for Mac.

Note that you have to use an username/password from the target machine, you may have to enter it in the following format: User name: servername username (where 'servername' is the name of the target PC, and username is a valid account on the target PC) Notes: The full path of the username could also work as: ' servername username', or even. Registered User: Connect to the other Mac using a valid login name and password. In the Finder, choose Go Connect to Server, enter the network. Enter one of the following in the 'Server Address:' box, replacing the. Make sure your Drew username is under 'Name:' and enter your Drew password for '.

We all have dozens and even hundreds of passwords to remember. Your Mac password, like a credit card PIN number, is one of the most important, so it can be a nightmare if you forget it. But it’s not the end of the world. There are a few easy ways you can reset your Mac password and make sure you don’t lose it ever again.

How to recover a forgotten Mac password

Secure experience is something you can’t emphasize enough while dealing with Apple devices. Hence the importance of a safe Mac password. While it could be easy to physically steal a computer, there’s little chance someone can mess with your data unless they know the password. So it’s wise to take a few precautionary measures to avoid losing it and make it easier to recover.

Easy way to reset passwords

Setapp has a reset scenario catered for you if you forget Mac login password. Just saying.

Use Recovery Mode

Hope this is just a “what-if” for you, but let’s imagine it happened. You forgot Mac password and can’t access any of your accounts. There are no password hints and you can’t call it to mind, even though you’ve already tried to enter all pet names. For such cases, there’s Apple’s Recovery Mode.

To activate the Recovery Mode:

  1. Turn off your computer and hold the power button + Command R. Wait for the loading bar to appear on the screen while your Mac boots to Recovery.
  2. Next, choose Disk Utility > Continue > Utilities Terminal.
  3. Type “resetpassword” (in one word) and click Return.
  4. Go to the main hard drive and choose your user account.
  5. Lastly, change Mac password, create a hint to easily recollect it in future, and click save. You’ll be able to use the new password after a restart.

Reset password with Apple ID

If you have an Apple ID tied to your user account on Mac, you can use it to reset password from the login window. The option should be available by default. Otherwise, you can enable it in System Preferences > Users & Groups > Allows user to reset password using Apple ID.

To make a go of this, click on the question mark next to the password field that you see on the login screen. Agree to the option to reset with Apple ID and enter wrong login credentials three times to be able to create the new password. Once you get to the reset screen, input a new password two times, create a hint, and save.

Server

Change password from another account

Lucky you if you have more than one user account on your Mac. Or, if your mother/brother/girlfriend/dog ever use your computer to log in to their personal accounts (yes, now you owe them a thank you). Here’s how to recover Mac password, using another account you have a password to:

  1. Log out of your admin user account
  2. Choose another account and enter the password
  3. Go to System Preferences > Users & Groups > Lock icon
  4. Use the password for the alternative account to unlock
  5. Reset the password for your admin account (type in a password > verify > create a hint > save).

Good news: You have a new password. Bad news: You still won’t be able to log in to your account if you don’t have the Keychain password and can’t create the new one. The thing is, to unlock all the features that require Mac Password, you should be able to access the Apple’s password management system, Keychain. Unless you remember the access data, you’ll have to create the new password with an admin account. If the account you used isn’t registered as admin, you’ll have to go for the Recovery Mode option.

Get a hint for your password

If you forgot Apple password, you can recover it with a hint. This is, by far, the most painless way to win back your access. Therefore, we encourage you to create hints each time you choose a new password. It takes a few simple actions:

  1. Access System Preferences > Users & Groups
  2. Click on the Lock icon > user name
  3. Select the option to change password and add a phrase/word you associate with a newly created password in “Password hint (recommended).”

One more important thing. To ensure your password hint shows up when you need it, you should allow your Mac to display hints. In the Users $ Groups, click on Login options and check the box next to “Show password hints.” Ready to go.

To see the hint you created, access User Groups in the System Preferences, unlock to make changes, and press Return three times. After the third time, your hint will appear right below the password field. Unless you’ve created the hint ages ago, this should help to refresh your memory.

Resort to Target Disk Mode

Another option is to access the hard drive of your Mac via another computer. Basically, Target Disk Mode allows you to save any data from the your Mac’s hard drive.

To enter the Target Disk Mode

  1. Shut down your computer and use FireWire or Thunderbolt cable to connect another Mac.
  2. Click on the power button while holding the T button and wait for the hard drive to appear on the screen.

That’s it. You can now easily access and recover any data from your Mac.

Always protect your data

Resetting password could make your Mac vulnerable. Particularly, Recovery Mode is kind of a security hole: If someone can get access to your computer, it’s pretty easy to boot into recovery and reset password. To prevent this from happening you should encrypt the data on your hard drive with a built-in FileVault utility. Ensure you unlock Password Reset with Disk Utility and activate FileVault on your Mac.

To activate FileVault in the Apple System

  1. Go to System Preferences
  2. Click on Security & Privacy > FileVault
  3. Unlock to enter your login and password
  4. Select “Turn on FileVault”
  5. Save Recovery key and password that you receive upon activating FileVault

Find lost passwords using Keychain Access

In case you’ve lost one of your internet logins or don’t remember the password to your WiFi, it’s very likely that you can recover it using your Mac’s native password manager — Keychain Access.

To recover a password with Keychain Access:

  1. Launch the utility from your Applications folder
  2. Use the search field in the top-right corner to filter for what you’re looking for
  3. Double-click on the wanted item
  4. Check Show Password and enter the Keychain Password to reveal it

Although Keychain Access can be very useful in finding passwords you thought were lost forever, it’s rarely used intentionally due to its clunky interface and messy save-all password behavior. However, using a password manager nowadays in general is a must. And if you have to start somewhere, look no further than Secrets.

Store passwords on Mac, securely

Grab Secrets along with your Setapp perks and worry not about privacy.

Store passwords using Secrets

Secrets is a simple but robust password manager that can become your central point of reference when looking for passwords, WiFi passcodes, secure notes, credit card numbers, and other personal information.

The app is supported by the industry-standard PGP encryption so none of your files will ever get exposed. And no, saving your passwords in the Notes app or on paper is not a good idea. Thankfully, Secrets is very easy to use.

  1. Download and launch Secrets
  2. Proceed through the setup guide
  3. To save your first password just click on the plus icon next to the search field and fill out all the necessary information

Additionally, Secrets has an importing feature where you can download all your existing passwords from other managers or even as a simple .csv file. And moving forward, Secrets can be populated through a handy browser extension with a quick built-in password generator.

Tip: autofill 2FA codes with Ohtipi

Remembering password hints is not the only complication. With many online services, you should type an OTP to log in, which requires you to: 1. Find your phone; 2. Open Messages; 3. Find the right OTP code; 4. Type it on your computer. Ohtipi can save you the trouble.

Ohtipi is a simple Mac utility that pulls OTPs from your iMessages and fills them in, whenever you need them. Forget about checking your phone every time a website asks you for an OTP code, Ohtipi has it covered.

Taking all the necessary measures to stay safe online is a must. This includes having good password hints for your Mac, knowing how to navigate through the Recovery Mode, and of course reliable tools for password management and 2FA, such as Secrets and Ohtipi, which are both available with a free trial through Setapp, a platform of over 200 best Mac and iPhone apps.

Setapp uses cookies to personalize your experience on our website. By continuing to use this site, you agree to our cookie policy.

Samba — программа, которая позволяет сделать из Linux/Unix компьютера файловый сервер для Windows машин. Если вы хотите со своего компьютера под Windows получить доступ к файлам на сервере под ubuntu, то на сервер надо ставить Samba. Также, начиная с 4ой версии, Samba позволяет полностью заменить контроллер домена Active Directory.

В Ubuntu Samba ставится командой

После установки сервер надо настроить, конфигурационный файл находится в /etc/samba/smb.conf

Сам конфигурационный файл разбит на блоки. В принципе всё там понятно, да и комментарии написаны подробно и ясно. Поподробнее остановлюсь на некоторых настройках. Например строчка

Делает так, что для того чтобы залогинится на сервере samba обязательно нужно использовать учётную запись сомой Ubuntu, то есть для того чтобы создать samba-юзера надо сделать следующее:

Сначала создать пользователя в Ubuntu

а потом создать samba-пользователя

Открыть доступ на какую-нибудь папку очень просто. Допустим, мы хоти сделать три доступных каталога:usershare – доступный только определённым пользователям, download – откуда можно только скачивать файлы и upload – папка для закачки файлов на сервер. Для начала создадим три директории/home/share/usershare, /home/share/download и /home/share/upload, сделать каталог upload доступным для записи

и запишем в конец конфигурационного файла /etc/samba/smb.conf следующий текст.

Не забудьте перезапустить samba после изменения конфиг. файла.

Так же для ленивых имеется графический интерфейс для настройки samba, только он не много умеет. Установить GUI для samba можно командой

Устанавливать его надо на комп с самбой и соответственно запускается он только с него же, поэтому ни о каком удалённом управлении через него речи не идёт, но управлять своей домашней шарой очень удобен. Запускается он командой

Все изменения он записывает в конфигурационный файл samba.

If you are either a power home user or you are in a business environment, you know the importance of machines being able to see one another. Recently I did an article about this very topic («Sharing Files & Folders Between Linux, Mac, and Windows«) which skimmed this topic, showing how simple it is to allow these different operating systems to see one another — with the help of Samba. But that article didn’t dig too deeply into Samba itself. That article was more of a «let’s see how we can do this quickly and easily» tutorial.

This time around I’ll focus more on Samba and how it is installed and configured to allow for the sharing of files and folders. For this article, we will look at the smb.conf configuration file and how it is set up and how to create new shares and even share printers. You will be using a text editor and a few commands. So get your fingers ready to type.

Installation

Installing Samba is really quite simple. Since we are going to be dealing with the command line, let’s install Samba in the same way. So open up your favorite terminal window and prepare to install.

All of the installation commands will be issued as either the root use or by using the sudo command Whether you use su or sudo will depend upon which distribution you are using. If you are using Fedora (or a Fedora-like distribution), you will su to the root user. If you are using Ubuntu (or a Ubuntu-like distribution), you will use sudo.

Within the terminal window, issue the command sudo apt-get install samba smbfs. If you are using Fedora that command would be yum install samba smbfs. Once Samba is installed, it is time to start configuring.

Configuration

There is only one file you need concern yourself with — /etc/samba/smb.conf. Out of the box, this file might be rather daunting. I always like to start from scratch, so I do the following (from command line):

  1. sudo mv /etc/samba/smb.conf /etc/samba/smb.conf.bak
  2. sudo rm /etc/samba/smb.conf
  3. sudo touch /etc/samba/smb.conf

The above simply makes a backup of the smb.conf file, removes the original, and then creates a new, empty smb.conf file.

Before we actually begin creating our smb.conf file, let’s take a look at how this file is structured. Thesmb.conf file is broken down in to sections, with each section beginning with [NAME] (Where NAME is the name of the section). Typical sections are:

  • [global] — This is the section that contains configuration options used in all sections.
  • [share] — This section will define a share name.
  • [printers] — This section will define a shared printer.

Within each section will be directives that define various aspects of a configuration. Let’s take a look at a minimal (but useful) smb.conf file.

[global]

netbios name = NETBIOS_NAME

workgroup = WORKGROUP

security = user

encrypt passwords = yes

smb passwd file = /etc/samba/smbpasswd

interfaces = 192.168.1.1/8

[SHARE_NAME]

comment = COMMENT

path = /PATH/TO/SHARE

writeable = yes

create mask = 0770

force create mode = 0770

locking = yes


[printers]

comment = COMMENT

path = /var/spool/samba

guest ok = Yes

printable = Yes

use client driver = Yes

browseable = No

NOTE: Everything in boldis system specific.

There are a few things we must touch on with the above configuration. Let’s go line-by-line as needed (many of the lines should be self-explanatory).

security = user: This line defines the method of authentication Samba will use. I have always found user to be the most reliable. Samba has five different methods:

  • user: Each user will have an account on the machine hosting Samba.
  • server: This mode is not used anymore — it defines an external authentication server.
  • ADS: Active Directory mode.
  • Domain: This type is a centrally located account which is shared between domain controllers.
  • share: Clients will authenticate against a particular share on the Samba server.

interfaces = 192.168.1.1/8: This line will dictate the addresses that are allowed to connect to your shares. This will be specified by your network topology.

create mask = 0770/force create mode = 0770: These lines dictate the permissions given to anything created, by users, within the share. In this case the clients will get read/write access to all files except those belonging to «other.» Without these lines, clients will have trouble creating files/folders in the share.

locking = yes: This is critical when sharing folders as it will create a lock file for any open file. When a file has an associated lock file other users can not open that file for writing. This prevents users from overwriting changes at the same time, causing file corruption.

use client driver = Yes: This line dictates that Samba is not required to share out drivers for clients. If you are on a larger network then you might want to share out drivers. Otherwise the drivers for the shared printer will have to be installed on the client machines.

Once you have that file created, save it and then restart Samba (with a command like sudo /etc/init.d/samba restart). Of course you’re not done yet.

Adding Users

If you do not add users to your Samba installation, those users will not be able to authenticate, which will keep them from browing/using the shares. In order to add a user you have to issue two commands:

sudo smbpasswd -L -a USERNAME

and

sudo smbpasswd -L -e USERNAME

Where USERNAME is the actual username on the system.

The first command will add the user and a password for the user (you will be prompted to enter the new user password after you enter the command). The second command enables the user for Samba.

Now your users are ready to authenticate and use Samba. You can go back to the original article I mentioned (at the beginning of this tutorial) to see how to connect to the server from both Mac and Windows.

Printers

A note about printers. In some instances Samba will not add the /var/spool/samba directory that is used for printer spooling. Check to see if this exists with the command ls /var/spool/. If you see samba there, you are good to go. If not, issue the following commands:

sudo mkdir /var/spool/samba

sudo chmod 777 /var/spool/samba

That should do it. Make sure the printer you wish to share actually works on the local Linux machine and it should be shared out and ready to go for your clients.

Содержание

  • Setting Up A Samba File Share Server
    • Configuration
  • Charity Administration Office

Setting Up A Samba File Share Server

Setting up a Samba file share is the easiest method for connecting a media server to a variety of computers of differing operating systems. It also provides easy access to the server for adding and removing files; especially for those not familiar with the command line environment.

This tutorial assumes that you have basic knowledge of the command line environment and have a Ubuntu server already running with SSH installed.

Message of Caution

Before we get started I have a message of caution for when setting up any new type of server. Always, always, always back up configuration files before you edit them. Trust me. I learnt this the hard way on a different server which resulted in a few fresh installs. This is even more important on a SheevaPlug as fresh installs are not as straight forward as a regular server.

So before editing any configuration file, make sure you type
cp configurationfile.extension configurationfile.extension.backup
Obviously replace the word configurationfile with the name of your file and use the proper extension. By adding .backup, or any other bogus extension, to the end of the file, you will preserve it in it’s original state. If you mess up the original configuration file, just copy the backup to the same name as it originally was. By taking this precaution when editing config files, I guarantee that you will save yourself some serious pains down the line.

Installing and setting up Samba is very easy. First start by installing from the repository with
apt-get install samba

Configuration

Now we’re going to set up the Samba config file. Make sure you backup the file as per the instructions above before you make any edits. Open the file for editing with
vi /etc/samba/smb.conf
Find the section Authentication section of the file. It will appear as so
####### Authentication #######
# «security = user» is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user
Uncomment the line
security = user
and add a line right after it so the final authentication section appears as so
# «security = user» is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
security = user
username map = /etc/samba/smbusers

Adding A Folder To Share

Now of course you will want to share a specific folder with the users in your house. We are going to share the external hard drive we have attached at /media/external.

Once again open up the smb.conf file for editing and find the «Share Definitions» section and add the text below.
#external media drive
[server]
comment = External Media Drive
browseable = yes
writeable = yes
path = /media/external
guest ok = yes
When you connect to the Samba share, you should have one option to select and that is «server». If you want to add more specific shares, duplicate the code above with your desired settings making sure that the name in the square brackets, currently «server», is different than the others. If you have more than one share set up, you will see the list of them upon connection.

Creating A Samba User

You can only create a samba user for a user that already exists on the system so make sure you’ve already done that before trying the next step.

This server is useless without users so lets add a user to Samba with the line
smbpasswd -a username
It will prompt you for a password and then a confirmation. Once completed, you now have a samba user.

Now that your Samba file share is all set up you can try connecting from your computer. For Mac OSX users, in Finder, go to the menu «Go» and select «Connect to Server» and type
smb://192.168.1.200
You will then be prompted for a username and password. Enter the proper credentials and select the share to connect to from the list provided. For our setup only «server» will be listed». After you connect, the file share will appear as a folder on your computer. From there you can stream media, add media and organize files from the comfort of your GUI desktop.

Samba-3: A Simple Anonymous Read-Write Server

Charity Administration Office

The fictitious charity organization is calledAbmas Vision NL. This is an office that has five networked computers. Staff are all volunteers with frequent staff changes. Ms. Amy May, the director of operations, wants a no-hassle network. Anyone should be able to use any PC. Only two Windows applications are used: a custom funds tracking and management package that stores all files on the central server and Microsoft Word. The office prepares mail-out letters, letters of invitation, and thank-you notes. All files must be stored in perpetuity. The custom funds tracking and management software has been configured to use a server named SERVER, a share named FTMFILES, and a printer queue named PRINTQ that uses preprinted stationery, thus demanding a dedicated printer. This printer does not need to be mapped to a local printer on the workstations.

Enter User Name And Password For The Following Server Word Mac 0611F Code

Printer handling in Samba results in a significant level of confusion. Samba presents to the MS Windows client only a print queue. The Samba smbd process passes a print job sent to it from the Windows client to the native UNIX printing system. The native UNIX printing system (spooler) places the job in a print queue from which it is delivered to the printer. In this article, network diagrams refer to a printer by the name of the print queue that services that printer. It does not matter what the fully qualified name (or the host name) of a network attached printer is. The UNIX print spooler is configured to correctly deliver all jobs to the printer.

This organization has a policy forbidding use of privately owned computers on site as a measure to prevent leakage of confidential information. Only the five PCs owned by Abmas Vision NL are used on this network.

The central server was donated by a local computer store. It is a dual processor Pentium-III server, has 1GB RAM, a 3-Ware IDE RAID Controller that has 4 x 200GB IDE hard drives, and a 100-base-T network card. The office has 100-base-T permanent network connections that go to a central hub and all equipment is new. The five network computers all are equipped with Microsoft Windows Me. Funding is limited, so the server has no operating system on it. You have approval to install Samba on Linux, but just make sure it works without problems. There are two HP LaserJet 5 PS printers that are network connected. The second printer is to be used for general office and letter printing. Your recommendation to allow only the Linux server to print directly to the printers was accepted. You have supplied SUSE Enterprise Linux Server version 8.0 and have upgraded Samba to version 3.0.2.

Dissection and Discussion

This installation demands simplicity. Frequent turn-over of volunteer staff would indicate that a network environment that requires users to logon might be problematic. It is suggested that the best solution for this office would be one where the user can log onto any PC with any username and password. Samba can accommodate an office like this by using the force user parameter in share and printer definitions. The use of the force user ensures that all files are owned by same user identifier (UID) and thus ensures that there will never be a problem with file access due to file access permissions. Additionally, you elect to use the nt acl support = No option to ensure that no attempts can be made to write access control lists (Posix type) to any file or directory. This prevents an inadvertent ACL from overriding actual file permissions.

This organization is a prime candidate for Share Mode security. The force user allows all files to be owned by the same user and group. In addition to this, it would not hurt to set SUID and set SGID shared directories. This means that all new files that are created, no matter who creates it, are owned by the owner or group of the directory in which they are created. For further information regarding the significance of the SUID/SGID settings, see Appendix A.6 (not available here – see Samba-3 by Example book).

All client workstations print to a print queue on the server. This ensures that print jobs continue to print in the event that a user may shut down the workstation immediately after sending a job to the printer. Today, both Red Hat Linux and SUSE Linux use CUPS-based printing. Older Linux systems offered a choice to use either the LPRng printing system, or CUPS. It appears, however, that CUPS has now become the leading UNIX printing technology.

Enter User Name And Password For The Following Server Word Mac 0611F list

The print queues are set up as Raw devices, which means that CUPS will not do intelligent print processing, and vendor supplied drivers be installed locally on the Windows clients.

The hypothetical software (Funds Tracking and Management) referred to is representative of custom-built software that directly uses a NetBIOS interface. Most such software originated in the days of MS/PC DOS. NetBIOS names are upper-case (and functionally are case insensitive), thus some old software applications would permit only upper-case names to be entered. Some such applications were later ported to MS Windows but retain the upper-case network resource naming conventions because customers are familiar with that. We made the decision to name shares and print queues for this application in upper-case also for the same reason. Nothing would break if you were to use lower-case names, but that decision might create a need to re-educate staff — something best avoided at this time.

NetBIOS networking does not print directly to a printer. Instead, all printing is done to a print queue. The print spooling system is responsible for communicating with the physical printer. In this example, therefore, the resource that is referred to as PRINTQ really is just a print queue. The name of the print queue is held to be representative of the device to which the print spooler delivers print jobs.

Implementation

It is assumed that the server is fully installed and ready for configuration of Samba 3.0.2 and for necessary support files. All TCP/IP addresses should be hard coded. In our case, the IP address of the Samba server is 192.168.1.1 and the netmask is 255.255.255.0. The host name of the server used was server. The office network is built as shown in Figure 2.1.

FIGURE 2.1 Charity Administration Office Network

Procedure 2.4. Samba Server Configuration

  1. Create a group account for office file storage as follows:
  2. Create a user account for office file storage as follows:

    where XXXXXXXX is a secret password.

  3. Use the 3-Ware IDE RAID Controller firmware utilities to configure the four 200GB drives as a single RAID level 5 drive, with one drive set aside as the hot spare. (Refer to the 3-Ware RAID Controller Manual for the manufacturers’ preferred procedure.) The resulting drive has a capacity of approximately 500GB of usable space.
  4. Create a mount point for the file system that can be used to store all data files. Create a directory called /data as follows:

    The 755 permissions on this directory (mount point) permit the owner to read, write and execute, and the group and everyone else to read and execute only.

  5. Use SUSE Linux system tools (refer to the SUSE Administrators Guide for correct procedures) to format the partition with a suitable file system. The reiserfs file system is suitable. Configure this drive to automount using the /data directory as the mount point. It must be mounted before proceeding.
  6. Under the directory called /data create two directories named ftmfiles and officefiles, and set ownership and permissions as follows:

    These demonstrate compound operations. The mkdir command creates in one step these directories:

    The chown operation sets the owner to the user abmas and the group to office on all directories just created. And the chmod operation recursively sets the permissions so that the owner and group have SUID/SGID with read/write/execute permission, and everyone else has read and execute permission. This means that all files and directories are created with the same owner and group as the directory in which they are created. Any new directories created still have the same owner, group, and permissions as the directory they are in. This should eliminate all permissions-based file access problems. For more information on this subject, refer toTOSHARG, Chapter 13, File, Directory and Share Access Controls, or refer to the UNIX man page for the chmod and the chown commands.

  7. Install the smb.conf file shown in Example 2.2. in the /etc/samba directory.
  8. We must ensure that the smbd can resolve the name of the Samba server to its IP address. Verify that the /etc/hosts file contains the following entry:
  9. Configure the printers with the IP address as shown in Figure 2.1. Follow the instructions in the manufacturers’ manual to permit printing to port 9100, so that the CUPS spooler can print using raw mode protocols.
  10. Configure the CUPS Print Queues as follows:

    This creates the necessary print queues with no assigned print filter.

  11. Edit the file /etc/cups/mime.convs to uncomment the line:
  12. Edit the file /etc/cups/mime.types to uncomment the line:
  13. Use the standard system tool to start Samba and CUPS to configure them to restart automatically at every system reboot. For example:
Enter User Name And Password For The Following Server Word Mac 0611F list

Example 2.2. Charity Administration Office smb.conf File

# Global Parameters
[global]
workgroup = MIDEARTH
security = SHARE
printing = CUPS
printcap name = CUPS
disable spoolss = Yes
show add printer wizard = No
wins support = yes
[FTMFILES]
comment = Funds Tracking & Management Files
path = /data/ftmfiles
read only = No
force user = abmas
force group = office
guest ok = Yes
nt acl support = No
[office]
comment = General Office Files
path = /data/officefiles
read only = No
force user = abmas
force group = office
guest ok = Yes
nt acl support = No
[printers]
comment = Print Temporary Spool Configuration
path = /var/spool/samba
printable = Yes
guest ok = Yes
use client driver = Yes
browseable = No

Procedure 2.5. Windows Client Configuration

Enter User Name And Password For The Following Server Word Mac 0611F 2017

  1. Configure clients to the network settings shown in Figure 2.1.
  2. Ensure that the netmask used on the Windows clients matches that used for the Samba server. All clients must have the same netmask. For example, 255.255.255.0.
  3. On all Windows clients, set the WINS Server address to 192.168.1.1, the IP address of the server.
  4. Set the workgroup name on all clients to MIDEARTH.
  5. Install the “Client for Microsoft Networks.” Ensure that the only option enabled in its properties is the option “Logon and restore network connections.
  6. Click OK when you are prompted to reboot the system. Reboot the system, then logon using any user name and password you choose.
  7. Verify on each client that the machine called SERVER is visible in My Network Places, that it is possible to connect to it and see the share office, and that it is possible to open that share to reveal its contents.
  8. Disable password caching on all Windows 9x/Me machines using the registry change file shown in Example 2.3. Be sure to remove all files that have the PWL extension that are in theC:WINDOWS directory.

    Example 2.3. Windows Me Registry Edit File: Disable Password Caching

    The best way to apply this is to save the patch in a file called ME-dpwc.reg and then execute:

  9. Instruct all users to log onto the workstation using a name of their own choosing, with a password of their own choosing. The Samba server has been configured to ignore the username and password given.
  10. On each Windows Me workstation, configure a network drive mapping to drive G: that redirects to the uniform naming convention (UNC) resource serverofficefiles. Make this a permanent drive connection as follows:
    1. (Right-click) My Network->Map Network Drive…
    2. In the box labeled “Drive:”, type G.
    3. In the box labeled “Path:”, enter serverofficefiles.
    4. Click Reconnect at logon. Click OK.
  11. On each workstation, install the Funds Tracking and Management software following the manufacturer’s instructions.
    1. During installation, you are prompted for the name of the Windows 98 server. Enter the name SERVER.
    2. You are prompted for the name of the data share. The prompt defaults to FTMFILES. Press enter to accept the default value.
    3. You are now prompted for the print queue name. The default prompt is the name of the server you entered (SERVER as follows: SERVERPRINTQ). Simply accept the default and press enter to continue. The software now completes the installation.
  12. Install an office automation software package of the customer’s choice. Either Microsoft Office 2003 Standard or OpenOffice 1.1.0 suffices for any functions the office may need to perform. Repeat this on each workstation.
  13. Install a printer on each using the following steps:
    1. Click Start->Settings->Printers+Add Printer+Next. Do not click Network printer. Ensure that Local printer is selected.
    2. Click Next. In the panel labeled Manufacturer:, select HP. In the Printers: panel, select the printer called HP LaserJet 5/5M Postscript. Click Next.
    3. In the panel labeled Available ports:, select FILE:. Accept the default printer name by clicking Next. When asked, “Would you like to print a test page?”, click No. Click Finish.
    4. You may be prompted for the name of a file to print to. If so, close the dialog panel. Right-click HP LaserJet 5/5M Postscript->Properties.
    5. In the panel labeled Network, enter the name of the print queue on the Samba server as follows: SERVERhplj5. Click OK+OK to complete the installation.
    6. It is a good idea to test the functionality of the complete installation before handing the newly configured network over to the Charity Administration Office for production use.

Validation

Enter User Name And Password For The Following Server Word Mac 0611F File

The first priority in validating the new Samba configuration should be to check that Samba answers on the loop-back interface. Then it is time to check that Samba answers its own name correctly. Last, check that a client can connect to the Samba server.

Enter User Name And Password For The Following Server Word Mac 0611F List

  1. To check the ability to access the smbd daemon services, execute the following:

    This indicates that Samba is able to respond on the loopback interface to a NULL connection. The -U% means send an empty username and an empty password. This command should be repeated after Samba has been running for 15 minutes.

  2. Now verify that Samba correctly handles being passed a username and password, and that it answers its own name. Execute the following:

    The output should be identical to the previous response. Samba has been configured to ignore all usernames given; instead it uses the guest account for all connections.

  3. From the Windows 9x/Me client, launch Windows Explorer, [Desktop: right-click] Network Neighborhood+Explore->[Left Panel] [+] Entire Network->[Left Panel] [+] Server->[Left Panel] [+] Plans. In the right panel you should see the files and directories (folders) that are in the Plans share.
Comments are closed.